How To Remove Stopper From Bathroom Sink Drain. At first, thread the cable connector to disconnect the drain from the cable. Unthread the bolt from the drain crossbar with a screwdriver or set of pliers and lift the stopper out of the drain.
Feed the pivot rod into the stub and through the hole on the drain stopper. It's common for moen sink stoppers to be attached to a lever, so you'll need to do some work under the sink to disassemble the sink stopper mechanism. Thankfully, the process is pretty straightforward.
If That Doesn’t Help, You Will Need To Grab The Tools And Follow The Instructions Below.
The entire body is attached to the threaded. There are also drain cleaning tools you can use, as well as drain openers. Soak the stopper in a soap and water mixture for an extended period of time before cleaning with a rag.
Remove The Rod From The Sink Stopper And Set It Aside.
First, remove the stopper and pull it out. Remove the pivot pin and. Here are the steps you need to follow:
So The Infections Will Spread To All.
This entire article is going to be on that. Because the things may drain out easily without our knowledge and we can’t search it for too. To deal with a bathroom sink that drains slowly, all you need to know is how to remove the drain stopper from the bathroom sink.
Or, Perhaps Your Sink Has Stopped Draining Completely.
Your bathroom sink stopper can usually be removed by hand by lifting the stopper and twisting. 6 steps to remove and clean the bathroom sink stopper. Unthread the bolt from the drain crossbar with a screwdriver or set of pliers and lift the stopper out of the drain.
Thank You For The Video!
Raise the stopper to its open position and pull it out of the drain. Pull the rod out to detach it from the stopper plug. The advantage of this is that you’ll likely have less of a major plumbing issue.